HP COLOR LASERJET M177 COLOR MISSING

 HP COLOR LASERJET M177 COLOR MISSING

HP COLOR LASERJET MFP M178NW PRINTING DOUBLE IMAGE

 HP COLOR LASERJET MFP M178NW PRINTING DOUBLE IMAGE

CANON E470 DISSEMBLING AND MAIN BOARD REPLACEMENT

 CANON E470 DISSEMBLING AND MAIN BOARD REPLACEMENT

CANON G2010 RESET ABSORBER FULL AND NOZZLE CHECK PRINT

 CANON G2010 RESET ABSORBER FULL AND NOZZLE CHECK PRINT

CANON E510 CHANGE PICK UP ROLLER

 CANON E510 CHANGE PICK UP ROLLER

HP M178NW REPLACE FUSER UNIT

 HP M178NW REPLACE FUSER UNIT

EPSON L3250 RESET INK PAD END LIFE

 EPSON L3250 RESET INK PAD END LIFE

EPSON L360 PAPER JAM / PAPER LIGHT BLINKING

 EPSON L360 PAPER JAM / PAPER LIGHT BLINKING

EPSON L3110 CHANGE INK PUMP

 EPSON L3110 CHANGE INK PUMP

CANON MF3010 PRINTING LOADING MULTIPLE PAGES

 CANON MF3010 PRINTING LOADING MULTIPLE PAGES

HP M178NW RESET TRANSFER BELT AND FUSER UNIT

 HP M178NW reset transfer belt and fuser unit

Follow the below instructions:-

1. Press menu, back, left and right. Then press ok and press stop button, and press menu again.

2. Press right find the tech mode then press ok.

3. Press right button find the data setup, press ok.

4. Press right button find the clear count, press ok.

5. Enter the pass code is 1934, press ok.

6. Find the fuser, press ok clear.

7. Find the transfer belt, press ok clear.

8. Final press stop button and power off the button.

9. You printer will back to normal.

You can refer to below video.

BROTHER DCP-T310, T510, T710W INK BOX FULL RESET

 Brother DCP-T310, T510 and T710W Ink box full reset

Follow the below instructions:

1. Press button menu, mono and menu.

2. Press the arrow button find the number of 8, then press ok.

3. Press the arrow button again and find the number of 0, then press ok.

4. Press the color button and find the purge count, then press ok.

5. Press the arrow button, then find the number of 2783 to reset the purge count.

6. After that press exit button.

7. Unplug the power cord cable and plug in the power cord cable.

8. Your printer will back to normal.

You can refer to below link video also.

BROTHER MFC-9330CDW ERROR "SLIDE THE GREEN TAB ON DRUM UNIT

Brother MFC-9330CDW error " slide the green tab on the drum unit".

Step 1: Open the scanner cover from the top and take out all the drum units. Then slide the green tab from left to right, repeating this process 15-20 times. After that put back the drum units and test print. Your printer will be back to normal.

HP PAVILION 14 LAPTOP UPGRADE SSD

 HP Pavilion 14 laptop upgrade to SSD.

Step 1: Unscrew all this screw from the bottom laptop.

Step 2: Dissembling the laptop keyboard and unscrew the screw and take out the body laptop cover.

Step 3: Take out the usb and sound board assembly, after that takeout the hard disk drive. Then unscrew the hard disk screw from the left and right cover.

Step 4: Screw back the hard disk cover with replace a new SSD Sata drive and fix back to the hard disk drive laptop and final put back the usb and sound board assembly.

Step 5: Fix back the laptop body cover and keyboad. And final step is screw back the laptop bottom cover.

BROTHER PRINTER DCP-J105 ERROR 8F

 Brother printer DCP-J105 error 8F. Error code 8F is printer timing disc problem. When timing disc was loose out, the transparent disc can't detect the paper sensor, this printer will come out error code 8F.

Solution:

1. Disassembling the center printer body cover (refer 1).

2. Pull out the scanner flat cable and scanner power cable, then disassembling the scanner unit (refer 2).

3. Take out the scanner stand (refer 3).

4. Disassembling the control panel (refer 4).

5. Disassembling the rear paper cover (refer 5).

6. Then final is taken out the printer body cover (refer 6).

7. After you done step 1 to 6, now can take out the timing disc and repaired it. Then put the timing disc (refer 7).

8. At last, you can install back all the printer part and do the nozzle checking test print. Then your printer will back to normal (refer 8).

refer 1

refer 2

refer 3

refer 4

refer 5

refer 6

refer 7

refer 8

CANON G1000 COLOR MISSING

Canon G1000 Color Missing. When print out nozzle check report, found that color yellow and magenta is missing (Refer1).

Solution:

1. Go to control panel, select the printer. Then select Canon G1000 and go to printing preference, select maintenance, then go for system cleaning. And select color CMY only for flushing ink.

2. After finish flushing ink, print out nozzle check report (Refer 2). Then you will see all the color is printed out.

3. After you done 1 and 2, you need to do is reset the waste ink counter to 0. Because when you perform system cleaning it will use a lot of ink and the ink pad counter will increase a lot. 

4. For how to reset waste ink counter, first you need set your printer to the service mode (Refer 3).

5. After that using Canon ST4905 software to reset the waste ink pad counter to 0 (Refer 4.

6. After you done all this step, your printer will back to normal. 

Refer 1

Refer 2

Refer 3

Refer 4

CANON G1020 INKJET PRINTER BLACK COLOR MISSING

 Canon G1020 Black Color Missing.

Solution:

1. Select the printer G1020 from the control panel > printer.

2. Select printing preference.

3. Select maintenance.

4. Select nozzle check. After that you will see the BCMY color printing report.

5. After step 4, you found that black color is missing, then you go to select ink flush.

6. Choose black color only (if your nozzle is all color missing, then choose for all color), then click start for flushing ink. (Before flush ink, please make sure you printer have enough ink inside).

7. After finished flush ink, then click nozzle check and check the BCMY color printing report.

8. After you done all this step, your printer will back to normal.

HP LASERJET M404DN POWER SUPPLY DAMAGE

 After checking and found that this printer power supply was burning (Refer 1).

Solution: Dissembling the side cover, unscrew the screw and take out the formatter board. After that unscrew the screw for power supply unit and change a new power supply.

Once done, your printer will back to normal (Refer 2)

(Refer 1)

(New power supply unit)

(Refer 2)

EPSON L3110 INK PAD END LIFE

Epson L3110 when power on and notice that ink light and paper light both are blinking. When this two lighting is blinking together, that mean this printer is time to do service. This printer error code is "Ink Pad End Life".

Solution: You need to use Epson Adjustment Program for Epson L3110 to do resetting the ink pad (Refer 1). You can refer to below video and follow the step. 

Step 1: Open the Epson Adjustment Program for Epson L3110.

Step 2: Click the select button and choose model L3110.

Step 3: Click particular adjustment mode

Step 4: Choose "waste ink pad counter", then click ok

Step 5: Tick the box for Main pad counter then click initialize button.

Step 6: Power off your printer then click ok button

After you done step 1 to 6, your printer will back to normal.

 

(Refer 1)

CANON E470 PAPER JAM

 CANON E470 after try print, paper stuck in middle.

Solution:

1. Power on the printer and press the black button. Try to make copy. After print when paper stuck the middle, then take out the paper and check which part of the paper has signs of being folded (Refer 1). Being folded that area will mean that have something stuck inside. (Refer 1)

2. Take out the thing from the paper loading area (Refer 2)

3. After you done, printer will back to normal (Refer 3).

Refer 1

Refer 2

Refer 3