DOCTOR PRINTER / COMPUTER / NOTEBOOK

HP M178NW reset transfer belt and fuser unit

Follow the below instructions:-

1. Press menu, back, left and right. Then press ok and press stop button, and press menu again.

2. Press right find the tech mode then press ok.

3. Press right button find the data setup, press ok.

4. Press right button find the clear count, press ok.

5. Enter the pass code is 1934, press ok.

6. Find the fuser, press ok clear.

7. Find the transfer belt, press ok clear.

8. Final press stop button and power off the button.

9. You printer will back to normal.

You can refer to below video.

BROTHER DCP-T310, T510, T710W INK BOX FULL RESET

Brother DCP-T310, T510 and T710W Ink box full reset

Follow the below instructions:

1. Press button menu, mono and menu.

2. Press the arrow button find the number of 8, then press ok.

3. Press the arrow button again and find the number of 0, then press ok.

4. Press the color button and find the purge count, then press ok.

5. Press the arrow button, then find the number of 2783 to reset the purge count.

6. After that press exit button.

7. Unplug the power cord cable and plug in the power cord cable.

8. Your printer will back to normal.

You can refer to below link video also.

BROTHER MFC-9330CDW ERROR "SLIDE THE GREEN TAB ON DRUM UNIT

Brother MFC-9330CDW error " slide the green tab on the drum unit".

Step 1: Open the scanner cover from the top and take out all the drum units. Then slide the green tab from left to right, repeating this process 15-20 times. After that put back the drum units and test print. Your printer will be back to normal.

HP PAVILION 14 LAPTOP UPGRADE SSD

HP Pavilion 14 laptop upgrade to SSD.

Step 1: Unscrew all this screw from the bottom laptop.

Step 2: Dissembling the laptop keyboard and unscrew the screw and take out the body laptop cover.

Step 3: Take out the usb and sound board assembly, after that takeout the hard disk drive. Then unscrew the hard disk screw from the left and right cover.

Step 4: Screw back the hard disk cover with replace a new SSD Sata drive and fix back to the hard disk drive laptop and final put back the usb and sound board assembly.

Step 5: Fix back the laptop body cover and keyboad. And final step is screw back the laptop bottom cover.

BROTHER PRINTER DCP-J105 ERROR 8F

Brother printer DCP-J105 error 8F. Error code 8F is printer timing disc problem. When timing disc was loose out, the transparent disc can't detect the paper sensor, this printer will come out error code 8F.

Solution:

1. Disassembling the center printer body cover (refer 1).

2. Pull out the scanner flat cable and scanner power cable, then disassembling the scanner unit (refer 2).

3. Take out the scanner stand (refer 3).

4. Disassembling the control panel (refer 4).

5. Disassembling the rear paper cover (refer 5).

6. Then final is taken out the printer body cover (refer 6).

7. After you done step 1 to 6, now can take out the timing disc and repaired it. Then put the timing disc (refer 7).

8. At last, you can install back all the printer part and do the nozzle checking test print. Then your printer will back to normal (refer 8).

refer 1